Welcome Guest! To enable all features please Register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
Offline mikael drago  
#1 Posted : Thursday, November 10, 2011 3:27:22 PM(UTC)
mikael drago
Rank: Newbie

Joined: 11/10/2011(UTC)
Posts: 8

I try to use Virtual Soundcard.
My receiver Onkyo TX-NR709 supports DLNA. But the Virtual Soundcard is unavailable, it has a red cross on it. Look at the picture.
The pc is running Windows 7 Ultimate 64-bit.

Edited by moderator Wednesday, May 9, 2012 6:19:01 AM(UTC)  | Reason: Not specified

Offline Scott  
#2 Posted : Friday, November 11, 2011 3:25:29 PM(UTC)
Scott
Rank: Administration

Joined: 1/25/2009(UTC)
Posts: 2,341
Location: Orlando, FL, USA

Originally Posted by: Mikael Drago Go to Quoted Post
I try to use Virtual Soundcard.
My receiver Onkyo TX-NR709 supports DLNA. But the Virtual Soundcard is unavailable, it has a red cross on it. Look at the picture.
The pc is running Windows 7 Ultimate 64-bit.

http://skei.org/IMAG0004.jpg

Hi Mikael,

Thanks for stopping by and checking out Jamcast. That's really strange to see the red X there, on the folder, and especially on the Podcasts folder too. Hmm...

Try this: open Jamcast Server Manager, click the Devices tab, double-click the device that represents the Onkyo TX, then set ForceMP3CaptureStream to True. Apply you settings and restart the device. Does that help?

Thanks!
Scott
Jamcast Developer
Support Page: http://getjamcast.com/Support.aspx
Offline mikael drago  
#3 Posted : Friday, November 11, 2011 4:54:17 PM(UTC)
mikael drago
Rank: Newbie

Joined: 11/10/2011(UTC)
Posts: 8

Didn't work.

http://skei.org/709settings.jpg

Trying to test it on my ps3 now... the virtual soundcard works there. But how long is the delay supposed to be?
Offline Scott  
#4 Posted : Tuesday, November 15, 2011 3:06:01 PM(UTC)
Scott
Rank: Administration

Joined: 1/25/2009(UTC)
Posts: 2,341
Location: Orlando, FL, USA

Originally Posted by: Mikael Drago Go to Quoted Post
Didn't work.

http://skei.org/709settings.jpg

Trying to test it on my ps3 now... the virtual soundcard works there. But how long is the delay supposed to be?

Hi Mikael...

Thanks for reporting back. It's good to know that things are OK with the PS3 -- the delay will vary depending on the quality of your network connection (is it connected wirelessly?), but it does consume a fairly large playback buffer before initial playback. I'd say normal is between 5-10 seconds.

With the Onkyo, how about EnableSeekTrickMode -- if you set that to True, does that help?

Thanks!
Scott
Jamcast Developer
Support Page: http://getjamcast.com/Support.aspx
Offline mikael drago  
#5 Posted : Tuesday, November 15, 2011 4:27:58 PM(UTC)
mikael drago
Rank: Newbie

Joined: 11/10/2011(UTC)
Posts: 8

Still the same Sad
Offline josk79  
#6 Posted : Sunday, November 20, 2011 8:16:26 AM(UTC)
josk79
Rank: Newbie

Joined: 11/20/2011(UTC)
Posts: 1

I have an Onky TX-NR509 and it also wouldn't play, but I found a workaround.

Add the Virtual Soundcard stream URL to the favorites list of your Onkyo and it will play.

1) Open your Onkyo's favorites list in your internet browser (by accessing the Onkyo's IP address)
2) Add a favorite with the following url (where ?.?.?.? is Jamcast's IP address and 58642 the Jamcast port)
:

http://?.?.?.?:58642/Media/audio/mpeg/CaptureStream

3) Access My Favorites on your Onkyo and PLAY! Smile


See this page for more info about the Virtual Soundcard URL's

Edited by user Sunday, November 20, 2011 8:21:27 AM(UTC)  | Reason: Not specified

Offline mikael drago  
#7 Posted : Thursday, November 24, 2011 3:42:12 PM(UTC)
mikael drago
Rank: Newbie

Joined: 11/10/2011(UTC)
Posts: 8

It don't work since the trial have expired :-( I don't wanna buy it before I know it works..
Offline Scott  
#8 Posted : Sunday, November 27, 2011 9:10:37 AM(UTC)
Scott
Rank: Administration

Joined: 1/25/2009(UTC)
Posts: 2,341
Location: Orlando, FL, USA

Originally Posted by: Mikael Drago Go to Quoted Post
It don't work since the trial have expired :-( I don't wanna buy it before I know it works..

Hi Mikael,

That's easy enough, I've extended your trial period for you. Hope you are able to resume troubleshooting and hopefully get this working real quick!

To acquire your extended license, just run the Jamcast installer again.

Thanks!
Scott
Jamcast Developer
Support Page: http://getjamcast.com/Support.aspx
Offline mikael drago  
#9 Posted : Sunday, November 27, 2011 1:16:19 PM(UTC)
mikael drago
Rank: Newbie

Joined: 11/10/2011(UTC)
Posts: 8

Originally Posted by: josk79 Go to Quoted Post
I have an Onky TX-NR509 and it also wouldn't play, but I found a workaround.

Add the Virtual Soundcard stream URL to the favorites list of your Onkyo and it will play.

1) Open your Onkyo's favorites list in your internet browser (by accessing the Onkyo's IP address)
2) Add a favorite with the following url (where ?.?.?.? is Jamcast's IP address and 58642 the Jamcast port)
:

http://?.?.?.?:58642/Media/audio/mpeg/CaptureStream

3) Access My Favorites on your Onkyo and PLAY! Smile


See this page for more info about the Virtual Soundcard URL's



Didn't work, I only get sound from the computer speakers.
Also tried this:
http://192.168.1.2:58647/Media/MP3/CaptureStream

:-(
Offline teel  
#10 Posted : Saturday, December 3, 2011 8:48:16 AM(UTC)
teel
Rank: Newbie

Joined: 8/13/2011(UTC)
Posts: 6

Has anyone come up with any solution to this one yet?

I have Onkyo TX-NR509 and I'm having exactly the same problem as OP and none of the solutions in this thread work.

The only working solution I've come up with is using Foobar2000's UPNP controller's Playback Stream Capture and then playing Jamcast's FLAC capture stream through that (you'll have to set Foobar's volume to 0 for this to work). It would be great to get this working directly between my receiver and Jamcast without Foobar in the middle.

edit: Actually I have Onkyo TX-NR609. Damn typos and my lack of proof reading.

Edited by user Friday, December 9, 2011 12:22:23 PM(UTC)  | Reason: wrong receiver model

Offline Scott  
#11 Posted : Friday, December 9, 2011 8:34:12 AM(UTC)
Scott
Rank: Administration

Joined: 1/25/2009(UTC)
Posts: 2,341
Location: Orlando, FL, USA

Hey guys,

I'm going to send a private message to each of you with a link to the latest build of Jamcast. There is a particular fix in there that I am interested to see if it solves this issue with the Onkyo devices.

We've had excellent results with the Onkyo devices in the past, so this leads me to believe something broke in a more recent version of Jamcast. Just a possible theory...

Check your inbox here for more info.

Thanks!
Scott
Jamcast Developer
Support Page: http://getjamcast.com/Support.aspx
Offline jason@jmwood.us  
#12 Posted : Saturday, December 10, 2011 12:54:21 PM(UTC)
jason@jmwood.us
Rank: Newbie

Joined: 12/9/2011(UTC)
Posts: 1

Adding my observations to this thread...

I have two Onkyo receivers: a TX-NR708 and a TX-NR609. Both receivers have the latest firmware as of Dec 10, 2011. I just heard of Jamcast yesterday and I'm giving it a try. It works fine with the TX-NR708 but I get the same symptoms describe in this thread on the TX-NR609 (red 'x' on Virtual Soundcard folder, etc.). I've tried both methods of connecting the receiver (network favorites with Jamcast Server URI and DLNA menus). Both work on the TX-NR708 and neither work on the TX-NR609. Both receivers are connected to the network via wired Ethernet and the TX-NR609 can stream Spotify and Pandora so I'm sure there isn't an Ethernet or IP problem with the network or the TX-NR609. It seems something in the handshake between the TX-NR609 and the Jamcast Server isn't going smoothly.

Scott/Jamcast TS, if the latest build you're privately sharing fixes the problem with 2011 Onkyo receivers could you please share the fix with me too?

Either way, I'm going to buy a license. It is a bummer it is not working with the TX-NR609 but just being able to play Spotify on the TX-NR708 via Virtual Soundcard is worth $30.
Offline teel  
#13 Posted : Saturday, December 10, 2011 1:51:42 PM(UTC)
teel
Rank: Newbie

Joined: 8/13/2011(UTC)
Posts: 6

Unfortunately the latest fix didn't solve the problem for me. I also have installed the latest firmware on my Onkyo TX-NR609.

I'm also sure there is no network problem, because I can stream audio using Foobar2000's UPnP stream capture on the same computer I am running JamCast.
Offline damjan  
#14 Posted : Friday, December 16, 2011 6:06:34 PM(UTC)
damjan
Rank: Newbie

Joined: 12/16/2011(UTC)
Posts: 1

Originally Posted by: josk79 Go to Quoted Post
I have an Onky TX-NR509 and it also wouldn't play, but I found a workaround.

Add the Virtual Soundcard stream URL to the favorites list of your Onkyo and it will play.

1) Open your Onkyo's favorites list in your internet browser (by accessing the Onkyo's IP address)
2) Add a favorite with the following url (where ?.?.?.? is Jamcast's IP address and 58642 the Jamcast port)
:

http://?.?.?.?:58642/Media/audio/mpeg/CaptureStream

3) Access My Favorites on your Onkyo and PLAY! Smile


See this page for more info about the Virtual Soundcard URL's


Thnx for this trick!!!! ThumbsUp ThumpUp

I have Onkyo TX-NR609 and also i have problem with connection.
I see folders shared via Jamcast, but i can't connect to Virtual sound cardSad
Offline Scott  
#15 Posted : Sunday, December 25, 2011 10:57:13 AM(UTC)
Scott
Rank: Administration

Joined: 1/25/2009(UTC)
Posts: 2,341
Location: Orlando, FL, USA

With respect to the Onkyo devices, I'm not sure what's going on yet but it's clear that some compatibility issues have cropped up as of recent -- historically we've not had much issue with these devices but with software constantly changing on both ends of the wire it's entirely feasible that something is now amiss.

It is curious that some Onkyo devices are OK while others are not...

I'm going to reach out to our friends Onkyo USA and see if I can't get any insight into the problem. I will report back here when I hear something...

Anyone make any progress on this in the meantime?

Thanks!
Scott
Jamcast Developer
Support Page: http://getjamcast.com/Support.aspx
Offline svantebergman  
#16 Posted : Saturday, January 14, 2012 6:55:28 AM(UTC)
svantebergman
Rank: Newbie

Joined: 1/14/2012(UTC)
Posts: 1

Originally Posted by: josk79 Go to Quoted Post
I have an Onky TX-NR509 and it also wouldn't play, but I found a workaround.

Add the Virtual Soundcard stream URL to the favorites list of your Onkyo and it will play.

1) Open your Onkyo's favorites list in your internet browser (by accessing the Onkyo's IP address)
2) Add a favorite with the following url (where ?.?.?.? is Jamcast's IP address and 58642 the Jamcast port)
:

http://?.?.?.?:58642/Media/audio/mpeg/CaptureStream

3) Access My Favorites on your Onkyo and PLAY! Smile


See this page for more info about the Virtual Soundcard URL's


This is great! You solved the problem for meSmile I have an onkyo 509 and it wouldn't play the virtual sound card until I setup a My Favorites URL as described above.
Offline DKing  
#17 Posted : Wednesday, January 25, 2012 1:06:42 PM(UTC)
DKing
Rank: Newbie

Joined: 1/21/2012(UTC)
Posts: 3

Originally Posted by: josk79 Go to Quoted Post
I have an Onky TX-NR509 and it also wouldn't play, but I found a workaround.

Add the Virtual Soundcard stream URL to the favorites list of your Onkyo and it will play.

1) Open your Onkyo's favorites list in your internet browser (by accessing the Onkyo's IP address)
2) Add a favorite with the following url (where ?.?.?.? is Jamcast's IP address and 58642 the Jamcast port)
:

http://?.?.?.?:58642/Media/audio/mpeg/CaptureStream

3) Access My Favorites on your Onkyo and PLAY! Smile


See this page for more info about the Virtual Soundcard URL's


Got the TX-NR509 today and this workaround works indeed!

Now get the play to function working, but thats a different forum :-)
Offline Scott  
#18 Posted : Thursday, February 2, 2012 10:26:59 AM(UTC)
Scott
Rank: Administration

Joined: 1/25/2009(UTC)
Posts: 2,341
Location: Orlando, FL, USA

Hey guys,

Regarding the Onkyo devices, I received the TX-NR609 this week and experienced no problems with the Virtual Soundcard whatsoever. So, I'm very interested in figuring out what issues are in play here.

For starters, do you all have the latest firmware from Onkyo? My device is up to date and reports this version of the firmware:

1211-1300-0010-6104

And is everyone seeing a red X next to the Virtual Soundcard track, indicating that it is not playable?

Thanks!
Scott
Jamcast Developer
Support Page: http://getjamcast.com/Support.aspx
Offline Sam_da_Man  
#19 Posted : Thursday, March 1, 2012 11:16:43 AM(UTC)
Sam_da_Man
Rank: Newbie

Joined: 1/3/2012(UTC)
Posts: 4

Hi, I have the exact same firmware on the Onkyo TX-NR609 and still have the red X next to the Virtual Soundcard. Seeing that this is the only reason I purchased Jamcast, it's slightly inconvenient. Yes, I've tried all the fixes you've suggested, Scott. I downloaded the Feb 29 release of Jamcast, too, to no avail. If you have a possible beta-fix, please e-mail it to me...
Offline Sam_da_Man  
#20 Posted : Thursday, March 1, 2012 12:13:33 PM(UTC)
Sam_da_Man
Rank: Newbie

Joined: 1/3/2012(UTC)
Posts: 4

For some reason the MyFavorites-fix stopped working too. Says "Connection Error. The server connection could not be established or was terminated early. Please try again later." This worked fine a couple of days ago (Before installing the newest version of Jamcast. What now? Am I stuck with a 40 dollar product that is completely useless? (Yes I sprang for the extra 10 for lifetime updates... Fat lot of good that does, now...)
Users browsing this topic
Guest (2)
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 0.485 seconds.